« PRODUCT SHOWCASE: Efficient Mold Setting | Home | Come Learn at Paulson School of Molding »
INJECTION MOLDING TRAINING: Hot Runner Molding Solutions
By admin | September 18, 2007
This plastics training from Paulson Training Programs uses the latest in 3-D technology and digital video imaging to go inside the mold and hot runner and examine the many components that make up the system. In addition to examining the parts of the hot runner and how plastic flows through the hot runner system, this program also demonstrates effective set-up and operating techniques and procedures when hot runner molding.
Lesson topics include nozzle types and gate styles used, the function of the manifold, melt channel considerations, manifold and nozzle temperature control, how to use hot runners with stack molds and multi-material injection molding processes.
To make the injection molding training more hands-on for the molder, the later lessons review recommended troubleshooting and safety techniques and explore, in detail, proper hot runner set-up, start-up and shutdown procedures. As a bonus, the final lesson in the course identifies common molding problems and describes procedures to help your personnel maintain and optimize your hot runner injection molding system.
Topics: Plastics Training, Injection Molding Training |
March 28th, 2008 at 4:58 pm
hello Mr/Miss
I am in doubt. I have “the hot runner solution model no 24v”, i have a trouble whit the hot runner because i dont have the electrical diagram, i have a screen but i dont know what slv means because whit this parameter had 4 or 6 so whit this value the hot doesnt work correctly so i cleaned this parameter—- after the runner was stabilize.